These tile press purchase guidelines need to be kept in mind
When customers buy tile presses, each manufacturer says that their equipment is good, and customers don’t know how to choose to buy it.
The first is the price. If the price of the equipment is very low, the quality may not be good, because no manufacturer can sell you the product at a loss.
Next, look at the machine as a whole to see its workmanship. Take a look at what you see with your naked eyes and check whether the color is correct. If you feel the color is correct, it means the quality of the machine used by this manufacturer is good. Then look at the middle plate and H steel used in the main unit. Do the materials meet the standards you require? Also check whether each screw is of good quality. Another important issue is whether the electrical control system is produced by a qualified manufacturer, because electrical is very important, and it determines that every production link of your machine must be controlled and completed by it.
Customers purchase the manufacturer – place an order – and receive the equipment. The tile presses produced by some manufacturers will be readjusted after long-distance transportation and hoisting. This depends on the selection and selection of raw materials for the production of tile presses. Speaking of the assembly level of workers, the selection of raw materials determines whether the machine is easy to deform and has a service life, and the manufacturing process, process and assembly level also determine the quality of the tile press.
The purchase of good raw materials and perfect manufacturing technology and procedures will make the equipment durable and of stable quality; experienced and skilled assembly technicians will assemble the press machine to ensure that the connection and tightening of each component are just right, such as the adjustment of the bearing position. : The four jackscrews must be in place and not loose. Otherwise, if the jackscrew is too tight, it will reduce the service life of the bearings and the motor. If the motor is pulled hard, it will cause overcurrent and heat and burn the motor. If it is too loose, it will be bumpy after long-distance transportation. If the front and rear upper and lower rollers are misaligned, the ridge lines of the produced color steel tiles will also be misaligned, which does not meet the quality requirements and needs to be readjusted before use.
Post time: Oct-16-2023