Introduction and equipment characteristics of multi-layer tile press

Introduction and equipment characteristics of multi-layer tile press

Recently, widening equipment has been widely used by more and more customers due to its multi-purpose characteristics. Many customers have also called to inquire whether all widening equipment can produce multiple types of patterns? First, let’s take a look at the conventional ones. One machine is a multi-purpose widening equipment. Conventional domestic tile press equipment has an original board width of 1 meter, while widening color steel equipment can press boards with an original board width of 1.2 meters. And general models such as roof tiles 840.850.860 wall tiles Any combination of 900, 910 and other types of widened double-layer equipment can produce four types of boards in one machine. That is to say, the widened equipment can produce boards with original 1.2 meters or original boards with 1 meter. In this way, original boards can be produced. A dual-purpose device can be used as a four-purpose device. However, not all widening equipment can be used for four purposes. For example, the customer requires a version of 1.2 meters or 1.25 meters, and the effective width after molding also has corresponding requirements, and a one-meter board cannot produce the overall version effect. , this kind of equipment cannot be used for multiple purposes.
 Introduction to machine maintenance
1. The maintenance of the color steel tile press must implement the principle of “paying equal attention to maintenance and focusing on prevention”. Regular maintenance must be carried out compulsorily and the relationship between use, maintenance and repair must be correctly handled. It is not allowed to use it without maintenance or repair without repairing it. keep.
2. Each team must perform maintenance work on all types of machinery according to the maintenance procedures and maintenance categories of the color steel tile press. No undue delay is allowed. In special circumstances, maintenance can only be postponed after approval by the specialist in charge, but generally the specified maintenance interval must not be exceeded. half of.
 3. Maintenance personnel and maintenance departments of color steel tile presses should implement “three inspections and one handover (self-inspection, mutual inspection, full-time inspection and one-time handover)”, constantly sum up maintenance experience, and improve maintenance quality.
 4. The Asset Management Department conducts regular supervision, inspects the mechanical maintenance status of each unit, conducts regular or irregular spot checks on maintenance quality, and rewards the superior and punishes the inferior.
5. In order to ensure that the color steel tile press is always in good technical condition and can be put into operation at any time, reduce downtime, improve mechanical integrity and utilization, reduce mechanical wear, extend mechanical service life, and reduce mechanical operation and maintenance costs, ensure To ensure safe production, we must strengthen the maintenance of mechanical equipment.
 6. The maintenance of the color steel tile press must ensure the quality and be carried out item by item according to the prescribed items and requirements. No guarantee shall be missed or not guaranteed. Maintenance items, maintenance quality and problems discovered during maintenance shall be recorded and reported to the specialists of this department.